STAINLESS STEEL SOLENOID VALVE
TYPE "W" FULL PORT
NORMALLY CLOSED - 1/2" TO 3" PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
MAX. STATIC PRESSURE
Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it.
(*Wetted parts - No Copper Bearing Alloys in contact with fluid)
*Valve Body - 304 Stainless Steel Globe Pattern - NPT ends
(For Flanged Ends go to Optional Features page)
*Piston - 303 Stainless Steel
Coil Enclosure - Malleable or Cast Iron,1/2 NPS conduit conn.
*Plunger - 430 Stainless Steel
*Pilot Valve - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel
*Body Seal - Non Asbestos Gasket
*Orifice Seal - Glass Filled Teflon
*AC Shading Coil - Silver
*Stem Pin - Inconel
Coil - Encapsulated Class H, 18 leads
|Strainers are recommended
for use with solenoid valves. Click here to link to the Strainers page.
When you order please supply the following:
Voltage (AC or DC)
Max. Diff. Pressure
Click here to link to the Optional Features page.
Shipping Weights above apply to Threaded Ends Only (except 3" which are Flanged Only)