|
|
||||||||
|
|
|||||||||
|
|||||||||
|
|
|
|||||||
|
STAINLESS STEEL SOLENOID VALVE
TYPE "W" FULL PORT NORMALLY CLOSED - 1/2" TO 2" PIPE SIZE NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN |
|||||||||||||||||||
|
MAX. FLUID TEMP.
400°F MAX. STATIC PRESSURE 200 PSI |
|||||||||||||||||||
| OPERATION: Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. |
|||||||||||||||||||
 |
 |
||||||||||||||||||
| CONSTRUCTION: (*Wetted parts - No Copper Bearing Alloys in contact with fluid) *Valve Body - 304 Stainless Steel Globe Pattern - NPT ends (For Flanged Ends go to Optional Features page) *Piston - 303 Stainless Steel Coil Enclosure - Malleable or Cast Iron,1/2” NPS conduit conn. *Plunger - 430 Stainless Steel *Pilot Valve - 303 Stainless Steel *Bonnet Tube - 304 Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon *AC Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, 18” leads APPLICATION: |
|||||||||||||||||||
 |
|||||||||||||||||||
| Strainers are recommended for use with solenoid valves. Click here to link to the Strainers page. When you order please supply the following: • Pipe Size • Valve Type • Voltage (AC or DC) • Hertz • Fluid • Fluid Temperature • Max. Diff. Pressure • Optional Features Click here to link to the Optional Features page. |
|||||||||||||||||||
 |
|||||||||||||||||||
|
Face To Face Dimensions For Flanged Ends
(For complete dimensions, weights, and other sizes |
|||||||||||||||||||
 |
|||||||||||||||||||
 |
|||||||||||||||||||