STAINLESS STEEL SOLENOID VALVE
TYPE "KR" FULL PORT
NORMALLY OPEN - 1/2" TO 3" PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
MAX. STATIC PRESSURE
Except valves listed for 500 PSI
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.
(*Wetted parts - No Copper Bearing Alloys in contact with fluid)
*Valve Body - 304 Stainless Steel Globe Pattern - NPT ends
(For Flanged Ends go to Optional Features page)
*Piston - 303 Stainless Steel
Coil Enclosure - Malleable or Cast Iron, 1/2 NPS conduit conn.
*Plunger - 430 Stainless Steel
*Poppet - 303 Stainless Steel
*Stem - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel
*Body Seal - Non Asbestos Gasket
*Orifice Seal - Glass Filled Teflon
*AC Shading Coil - Silver
*Stem Pin - 304 Stainless Steel
Coil - Encapsulated Class H, 18 leads
|Strainers are recommended
for use with solenoid valves. Click here to link to the Strainers page.
When you order please supply the following:
Voltage (AC or DC)
Max. Diff. Pressure
Click here to link to the Optional Features page.
Shipping Weights above apply to Threaded Ends Only (except 3" which are Flanged Only)