BRONZE SOLENOID VALVE
FULL PORT - NORMALLY OPEN
1/2" TO 1" PIPE SIZE
NO DIFFERENTIAL PRESSURE REQUIRED TO OPEN
MAX. FLUID TEMP.
MAX. STATIC PRESSURE
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and sealing it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston, allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.
|CONSTRUCTION: (* Wetted parts)
*Valve Body - Cast Bronze, Globe Pattern - NPT ends
*Piston - Cast Bronze
Coil Enclosure - Malleable or Cast Iron, 1/2 NPS conduit conn.
*Plunger - 430 Stainless Steel
*Poppet - 303 Stainless Steel
*Stem - 303 Stainless Steel
*Bonnet Tube - 304 Stainless Steel
*Spring - Inconel and 302 Stainless Steel
*Body Seal - Buna N or Non Asbestos Gasket
*Orifice Seal - Buna N (Viton or Glass Filled Teflon available)
*AC Shading Coil - Copper
*Stem Pin - 304 Stainless Steel
Coil - Encapsulated Class B, 18 leads - (Class H available)
|Strainers are recommended
for use with solenoid valves. Click here to link to the Strainers page.
When you order please supply the following:
Voltage (AC or DC)
Max. Diff. Pressure
Click here to link to the Optional Features page.
Not available for DC operation
"A" Dimension does not include the "MS" Mounting Stud (Approx. 7/8")
Note: The addition of any bottom mounted option would replace the "MS" Mounting Stud and change the prefix to reflect the appropriate option.